PowerLight™ LED Light Therapy System — Treatment Procedures

  1. Remove all make up and cleanse the entire area to be treated. A regular cleanser may be used.
  2. Connect the two red 38 LED probes to the pulsed probe ports.
  3. Apply a generous layer of the PowerLight™ Gel (slip agent) to the area to be treated.
  4. Divide the face into 3 regions, the jaw-line, cheek area and forehead.
  5. Turn the Power Light™ key to the "ON" position, and select the "LOW" setting. Push the 90 second red timer button.
  6. Place the two probes directly in contact with the skin on the jaw-line region (handles facing towards you) working on the "low" SETTING. Move the probes in a circular motion until the audible tone is heard from the timer (90 seconds).
  7. Select the "medium" setting, reset the red timer button and repeat the circular movements on the jaw-line region until the audible tone is heard.
  8. Select the "high" setting, reset the red timer button and repeat the circular movements on the jaw-line region until the audible tone is heard.
  9. Repeat steps 6 through 8 for the cheek region and the forehead region.
  10. For an acne treatment, plug in the blue probe to the pulsed port and apply the probe directly to the acne lesion(s) for 90 seconds each lesion.

 

 

WEBSITE POWERED BY L-A INTERACTIVE